Watercolor Heart Block

Cut a 27 ½” square piece of lightweight fusible interfacing. Most fusible comes in 20” widths, so you may have to seam two pieces as shown. Use a pencil and ruler to mark lines every 2 ½” horizontally and vertically to make a precise grid for our design or lay the fusible interfacing on a grid cutting mat to see the ruler lines through it.

Next “fussy cut" the pieces needed for the heart's top and bottom points. To help find the perfect spots in the print, cut a 2 ½" square hole in the center of a piece of card stock. Use the paper to help find perfect pieces for points.

After finding the four points for the heart, cut the remaining print fabric in 2 ½" squares.

Let the puzzle begin! Starting with pieces more solidly covered in flowers, fill in the main parts of the heart design. Look for pieces with solid white areas along the edges and match them to the curves of the heart. Move the pieces around to try the puzzle in several ways until you find the layout you love. Our example print has little petals floating in the background. I wanted to use some of these pieces and I floated them around the outside of my finished heart. Next, fill in the solid background squares in the center and around the furthest edges of the grid.

Ensure all the edges are as straight and aligned as possible and carefully press your pieces onto the fusible interfacing. *To transfer my layout to the ironing table, I brought the whole mat to the ironing table and carefully slid the interfacing off the mat onto the ironing surface. *

With right sides together, press an entire vertical row to the side and sew the seam.

Press the seam to the side and repeat for all vertical rows. Repeat for all horizontal rows.

I chose to make this block into a pillow cover. The example is quilted with diagonal quilting lines every ½”. The binding fabric used is Haystack from the Madrona Road collection.

Your project is finished! If you love this tutorial, be sure to check out Janome.com for even more inspiration.

This is a perfect project for kids. My daughter really liked the pillow I created and designed her own using Flight in black from my Waterfront Park collection matched with black background fabric. The overall loose print makes building your heart a simpler process. She uses a ¼” seam foot with guide to get perfect, straight seams. The speed regulation on her machine helps her control her project for a successful finish! She loves her pillow. After this photo was taken the pillow vanished to the depths of her tween room.